Krystal Surface Solution - Product

E - POLISH 250

E-Polish 250 of Stainless Steel

E-Polish 250 is essentially the reverse electrolysis process by which a metal is removed from a work piece by passing appropriate electric current while the work is dipped in a specially-formulated solution. In an E-Polish 250 system, the work piece is dissolved by adding metal ions to the solution thus removing flaws from the surface of the metal part.

E-Polish 250 is a precision controlled electrochemical elimination of the surface metal, ensuing vivid "mirror like" look with enhanced chromium enriched metallurgical surface properties. Referred as "reverse plating", this process has a levelling effect producing smoothness and enhanced reflectivity. Most significantly, the distorted, vague surface layer of the metal is removed off, thus leaving a chromium-rich, passive surface free of embedded contaminants like iron and work-inducted residual stresses from machining and forming. This procedure is safe and does not cause etching and pitting under controlled situations. E-Polish 250 will eliminate hydrogen from the surface limiting the bacteria growth.

Benefits of E-Polish 250

★ Burr removal
★ Brightening
★ Oxide and tarnish removal
★ Increased corrosion resistance and durability
★ Complete passivation
★ Removal of surface occlusions
★ Removal of directional lines
★ Reduction in surface profile
★ Improved adhesion in subsequent plating
★ Improved conductivity
★ Reduced surface friction
★ Reduced buffing & grinding costs
★ Compatible for welding, soldering and achieving high vacuum
★ Stress relieved surface
★ Increased ratio of chromium to iron
★ Removal of hydrogen
★ Improves surface reflectivity
★ Reduces growth of bacteria in food industry application

Product	Recommended Use	Use Parameters
E–Polish 250	For Electro Polishing of Stainless Steel	Ready to use electrolyte, 100% concentrated
E–Polish 250 Additive	Super Additive for Electro Polishing electrolyte	Regular additions of E–Polish 250 A to working solution gives lustrous bright & non–etching smooth surface

Areas of Applications

There is a wide range of product & industry applications for Electro Polished SS items including the following.

Architectural

Gates, lampposts, floor (durbar) plating, door furniture, glass panel fixings (wrought or cast), sculptures, handrails, etc

Automotive

Radiator grilles, tyre making plant vessels, bull-bars, safety equipment frames, bezels, etc

Food and Beverages

Food mixing blades, brewing vessels, confectionery moulds, vending machine water tanks, etc.

Leisure

Swimming pool building furniture including ladders, & disabled lift frames

Medical

Surgical instruments, vein tubes, surgical implants

Pharmaceutical

Powder hoppers, pipes & valves, process tanks, etc

Pulp & Paper

Screen cylinders

Semiconductor & High Vacuum Plant

Pump parts, clean room process equipment & furniture, valves, pipe-work.

Textiles

Dyeing vats

Krystal Surface Solutions provides complete process set-up starting from consultancy, process machines, and full accessories, fixture, training to workers & testing of used solution for E-Polish 250.

Safety and Precautions

Person handling this product must wear rubber gloves and avoid direct contact with eyes. In case of any contact, it must be washed with lots of fresh water. Seek medical advice if required.

This information is based on present level of knowledge. It is given in good faith but not intended to guarantee any peculiar properties. The users must satisfy themselves that there are no circumstances requiring additional information of verification or precaution of details given herein.